home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Diamond Collection
/
The Diamond Collection (Software Vault)(Digital Impact).ISO
/
cdr37
/
pfed_092.zip
/
REVISION.HST
< prev
next >
Wrap
Text File
|
1995-04-24
|
62KB
|
867 lines
────────────────────────────────────────────────────────────────────────────
New Main Support Site just for HAP Utils (PFED, BOOMER Utils, etc)
To report bugs, give suggestions, get latest versions call:
LCS Support BBS [407] 898-4148 <<<<<<<<<<< NEW SUPPORT BBS #
Support file access given on 1st call.
────────────────────────────────────────────────────────────────────────────
04/24/95 v0.92 ■- Added boolean operands: & (AND) and | (OR) for use when
~~~~~~~~~~~~~~ doing complex text searches. Do not use both together.
Ex: HSLINK & PROTOCOL & BETA would find any files that
Complex Scans contained ALL three text strings.
Ex: PFED | BOOMLAB | BOOMER would find any files that
contained any of the three text strings.
- When viewing logs or scans it displays % viewed at top.
■- The <O> key now updates ON-LINE/OFF-LINE status of all
Update Status files in a DIR. If files are restored it will restore
of all files their dates, if files aren't ON-LINE they will be changed
to 'OFF-LINE' Filesize's will also be updated. (Scufi)
- When using <F>ile's creation date on local uploads it
errored out if using Netware 4.0+ - Fixed? (Mark M.)
- When deleting files & leaving a 0-Byte file it will now
show 'OFF-LINE' instead of 'DELETED' (Stargrove)
■- Download Counter didn't count files if filename was less
than 12 bytes in length (Only since last version) -Fixed.
■- When uncompressing files to floppies it will now prompt
'Insert blank diskette into drive A:/B: for each disk.
■- BOOMLAB v0.59 - Added 2 new options:
- Added support for PCBoard PSA 'PCBALIAS', in the setup
Support for (Page #2, option #16) enter the path to the USERS file.
PCBALIAS Ex: D:\PCB\MAIN\ to enable. If a user has entered their
alias, this name will be used for 'uploaded by' name.
Strip MCI Codes Not available on local uploads.
- Added BOOMLAB option to 'Strip MCI | color codes <Y/N>?'
- If virus scan result was 'NO FILES!' the FILESYS.PPE
considered the file to have failed - Fixed (Fiat)
04/07/95 v0.91 - The DOWNLOAD COUNTER will only read the PCB Transfer log
~~~~~~~~~~~~~~ once so should now be noticeably faster now.
Fixed a bug with Private dirs in Download Counter.
- When using the 'F'- Import master FILES.BBS the complete
path & filename must be entered to allow filenames that
are not 'FILES.BBS' Ex: DIRS.LST. Also added support for
another master list type format. (Frosty)
- Can now define what ANSi viewer to use in PSETUP.EXE,
The provided MV.EXE has some limitations. (SkyGod)
- Added switch 'MONO' to force MONO video mode. (R. Murray)
- When adopting files using '+' PFED now gives option to use
<C>urrent, or <F>ile's creation date for upload date.
- Can change extract options when using <X> in arc viewer.
- Searching some Random BBS ads caused Fatal Error #6-Fixed.
- Text '^^^' detected as ASC Graphics, and not word-wrapped.
03/23/95 v0.90 ■- Previous maximum # of conferences was 200, you can now
~~~~~~~~~~~~~~ have up to 999. Let me know on the support board if
Now supports there are any problems. PSETUP.EXE will create a file
999 conferences named UPLDIR.LST Do NOT Delete. Also in the PSETUP.EXE
'Alternate Starting Conference' has been removed.
■- When <U>ncompressing files proggy will now let you edit
the extract options before proceeding, or just press
<U>ncompressing <Enter>. The -d option (maintain directory structure
Files option) was missing - Fixed. Also when extracting to
floppy it will add the volume -$ switch. (Highbinder)
■- 'Get Description' setting in user defineable processing
User-defined options should always be on, so i removed it from the
test options options screen. You should redo your settings.
changes It also did not add the 'uploaded by'. (Mr. Humble)
■- BOOMLAB v0.58 - Deleting BBS Ads is now slightly faster.
- If '-*-' was added to ZAPFILES list BOOMLAB deleted all
volume labels and subdirs - Fixed. (Wildchild)
Replacing - Added option 'Text to replace in DIZ's' this works like
DIZ Text the DIZ Lines Remover but only removes the exact text
string with nothing, it does not remove the whole line.
03/12/95 v0.89 ■- Added support for System Express or System-X BBS v1.00ß
~~~~~~~~~~~~~~ Not tested by anyone, hopefully it works ok. Tell your
Added System-X System-X friends to try it out.
support ■- Got TOO many requests on what to do and not to do when
processing files locally. So now there's a configuration
screen ('B' from in the directory) to do it your way.
User-defined So that when prompted "Test All Files <Y/n/g/p>"
test options Y = Completely test
==> P = User defined options only.
G = Get FILE_ID.DIZ only.
The <P> key will use your desired options.
■- If using the e<X>pert file moving mode. When entering the
file area # to move files to, you can press F2 and select
Expert Move area from the directory list. What is expert mode?
improvements Instead of having to tag files and move them to each dir
use expert mode to define where it is to be moved to, then
do a <M>ove and they will all be move to defined areas.
It also now prompts confirm Y/N when exiting expert mode
so tags won't be lost. Fixed a few bugs.
■- Some paths didn't show correctly in Dupe Checker - Fixed.
- Fixed some getting file date bugs related to 4DOS (Scufi)
■- BOOMLAB v0.57 - When BOOMLAB exits it will now display
and/or log whether the file PASSED or FAILED BOOMLAB.
- [PCB] Added support for an external 'PCBFAIL.MSG' file
displayed in PCBoard when a file fails. Did it quickly
BOOMLAB v.57 if you can do better, send it to me ;)
- [PCB] If running other tests before BOOMLAB, and it fails
(PCBFAIL.TXT already exists) BOOMLAB will fail the file.
- If running BSETUP only and F2 (Edit Text) is pressed it
now allows the user to define a text editor. (Mr.Humble)
- LOCAL mode: if WARNING message is added it's also added
to all files that follow it - Flag reset (MISFIT)
- Virus scan setup in BSETUP was screwed-Fixed. (Mr. Humble)
- BBS Ads have not been deleted since Comm routines
were added (v.53) - Fixed (Mr. Humble)
03/03/05 v0.88 ■- Press <L> in the file directory and any files marked
~~~~~~~~~~~~~~ OFF-LINE that have been restored will have their date
fields changed back to their original file dates.
Online status - <O> key now marks all missing files as 'OFF-LINE'
& 0-byte files - <CTRL+O> now tags all missing files.
- <CTRL+D> now tags all files marked as DELETED/OFF-LINE.
- When deleting actual files in subdirs, PFED will prompt
'Create 0-Byte file' keeps file from being re-uploaded.
- Online status for 0-Byte file showed 'Yes' now shows '(0)'
because it's there, but only a 0-byte file. (Mr. Humble)
■- New setting in PSETUP- Operating system: <M>=MSDOS,
<N>=NDOS, <4>=4DOS. If set, the adopt files option use
<C>urrent or <F>ile date will now work for 4DOS. (Scufi)
■- Couldn't move files to a conf # over #99 - Fixed (Stickman)
■- Added support for importing a 4th FILES.BBS format.
Where the description starts at space 36. (Skip Evans)
■- Could view inside the archive viewer more than once,
exited with ILLEGAL FUNCTION - Fixed. (SkyGod ... )
■- BOOMLAB v0.55b- If using multiple virus scanners they can
now be defined in the BSETUP program.
- If file failed a test & both LOG & Move FAILED file to path
were enabled program errored & halted -Fixed. (MADMAN T)
- If ZIP Comment file didn't exist it would error out.
02/22/95 v0.87 ■- PSETUP Would error out - Fixed (Fiat/D.Labadie/R.Rabbit)
~~~~~~~~~~~~~~ - When using F2 in BSETUP, selected editor not used. (Fiat)
■- Fixed a bug with viewing embedded files over a meg.
■- Master List would only write one dir if using '%' headers
BUGS! Fixed: Previous header wasn't being closed (DR. DAVIS)
BUGS! ■- ARJ READ-ONLY FILES....Found a problem with ARJ files,
BUGS! Unlike ZIP's ARJ files don't mask the read-only attribute
BOOMLAB then couldn't delete the files or remove the
subdir, and it will soon fill up your hard-drive! Did a
quick fix using 'ATTRIB -R *.*' if read-only is detected.
- Added 'DISK.ID' as the third description file to scan for.
- If random ads is enabled any text file containing the
macro @BEGIN_FILE_ID.DIZ/@END_FILE_ID.DIZ is detected it
can be us as a file desc, used in Amiga circles. (Tosh10)
- BOOMLAB could lock up when stripping @ codes.
02/19/95 v0.86 ■- When adopting files using <W>, PFED will now prompt to
~~~~~~~~~~~~~~ 'Use <C>urrent or <F>ile date' <C> uses current date
Upload date for upload date, <F> uses file's creation date. (Scufi)
■- Setup program is now 2 programs PSETUP.EXE for PFED,
BSETUP.EXE for BOOMLAB. So I can release an update
of BOOMLAB without PSETUP screwing up the BOOMLAB.CFG
■- Archive Viewer: Added PAK and ZIP/LHArc's SFX support &
fixed bug that wouldn't allow viewing embedded archives.
■- Press <Esc> during <F>ind text to abort it. (Highbinder)
■- Added <F1> Editing keys help screen in Description Editing
mode. Sometimes you had to press F1 many times -Fixed.
■- BOOMLAB v0.54: Added new option, 'Display progress to
BBS user' if enabled it will display to user what is
COM Routines being done so they don't think the system is locked.
for online Graphics match the PCBPASS.TXT screen. (PCBUSER.ANS)
callers BOOMCOM.EXE & PCBUSER.ANS must be in same path as config.
- Updated FILESYS.PPE to handle Dupe Check failures, config
New FILESYS.PPE must be completely re-entered as structure has changed.
- Added support for a 'Privileged User' list. Uploader still
Privileged gets credit for a FAILED upload and file gets posted.
User List - Added 2 options to fine-tune LOCAL processing:
'Duplicate Check Local uploads (Y/N)'
'Confirm FAILED files move or delete (Y/N)' (R. Murray)
- Added support for old .PAK format.
- Added support for PKZIP's & LHarc's Self-Extracting format.
- Embedded archives were not being CRC or Virus scanned!
- If ad is in Zapfiles list it will also now delete ad even
if in Embedded dir. Ex: ASS.AD Kills STUPID/ASS.AD
BUGS... - If FILE_ID.DIZ is not found BOOMLAB errored out with
a ERROR #52 - Fixed. (Stratocaster/Doyen/Dragon Master)
- Testing an embedded archive that was in a recursive path
caused a ERROR #76 - Fixed (Highbinder)
- Increased stack memory to help prevent lockups.
- If run from a root dir ex: C:\ it would error 75 - Fixed.
- Fixed some bugs with External Dupe Checkers. Make sure
BOOMDUPE.BAT is replaced with one in this version.
02/12/95 v0.85 ■- FILE DESCRIPTION EDITING:
~~~~~~~~~~~~~~ - <ENTER> on the last line of desc now adds a new line.
- Finally Added desc editing keys for block deletes, block
moves, cutting and pasting, etc...
/ <ALT+L> - Mark line. To define a block, mark
Mark areas / the beginning and ending of area.
Delete & Move <ALT+U> - Unmark all lines.
\ <ALT+D> - Delete marked area. (remains in buffer)
\ <ALT+M> - Move marked area to cursor location.
<ALT+A> - Add/Append marked area to buffer. Will
/ be added to whatever is already in buffer.
/ <ALT+C> - Copy marked area to buffer. Can then
Copy/Paste keys use paste (ALT+P) to make a copy or copy
(Buffer) \ it to other file descriptions.
\ <ALT+X> - Clear Buffer.
<ALT+P> - Paste (Insert) whatever's in buffer to
any description at the cursor location.
■- Create 0 byte file when NUKING didn't work - Fixed. (HDC)
■- <Esc> in Archive/DOS viewers now exits. (popular demand)
- <Tab> in the Archive viewer moves screen 20 spcs to the
right, needed to view long ZIP embedded paths.
- Couldn't delete files in embedded paths - fixed.
■- BOOMLAB v0.52 - Added support for External Dupe Checkers
ZDCS and ULP both by Stacey Smith. They're fast and will
External Dupe check contents of upload to detect if someone is trying
Checkers to upload a renamed file. Select system to use and path
ULP & ZDCS to it on Pg #1 of BOOMLAB setup. If using ULP create a
ULP config file named BOOMULP.CFG and turn off all other
options. See BOOMLAB.DOC for more (Mr. Humble/Jerry S)
Random keyword - Fixed major bug with deleting random ads by text keywords.
Search fixed Also if any files in an archive contained ASCII char 255
it screwed up the whole process - Fixed.
- 'EXCLUDE' file dates list was optimized & much faster.
- Was cutting off DIZ macros in ZIP comments - Fixed.
- If text to replace 'Carrier Lost ...' is used, the string
∞ Description in FILE_ID.DIZ ∞ will also be replaced.
- THUNDERBYTE v6.32 - 'AF' switch removed because it caused
the program to halt with a warning box. (great for BBS's)
Author says you can't have a non-exe infected without
infecting a exe. Untrue if in an archive, oh well. (Fiat)
02/06/95 v0.84 ■- DOWNLOAD.TXT (PCB) - When using <G>et DIZ or <P>rocess
~~~~~~~~~~~~~~ file and uploader is not known PFED will automatically
More search the transfer log if 'Add Uploaded By' is enabled.
DOWNLOAD.TXT - Local uploads are added to the DOWNLOAD.TXT file.
Support - When adding files and using '<?> Scan DOWNLOAD.TXT for
uploader' the date will be used for upload date if found.
- Fixed BUG where if uploader is not found it will NOT use
previous uploader found. (Ace of Spades)
■- Filesize now updated after archive viewing. (Ace of Spades)
- <Esc> at 'Move Files to Conference #' returns to DIR list.
■- BOOMLAB v0.51 - ADDED 5 OPTIONS (See BOOMLAB.DOC for more)
∙ 'Maximum # of desc lines'. It will properly adjust length
BOOMLAB v.51 of DIZ if too long, won't cut off uploader or DESCADD.TXT
∙ 'Extentions to bypass scan', for BBS's with virus areas,
5 new options any listed extensions (Ex: .VIR) won't be scanned. (Bubba)
GIFTEST/GIFLITE ∙ Strip PCBoard/Wildcat @ color codes from DIZ <Y/N>
supported ∙ Compress GIF using GIFLITE <Y/N> -Requires GIFLITE.EXE (JS)
∙ Process GIF using GIFTEST <Y/N> -Requires GIFTEST.EXE (JS)
■- LOCAL PCB MODE - Can now use wildcards for archive name.
LOCAL Wildcards Ex: D:\PFED LOCAL D:\INCOMING\*.* [PCB DIR] [MOVE TO...]
(File Tossing) So it can now be used as a basic FILE TOSSER for Echo's
etc... See BOOMLAB.DOC for more info. (Mr. Humble)
■- BUGS: Deleting random BBS ads by text search didn't work,
found text had to be all CAPS!-Fixed (Highbinder/Bionic)
- If DIZ came from a console & normal BBS Ad text was added,
BOOMLAB didn't detect and convert to IBM format - Fixed.
- Fixed PCB problem with 1st line using Word-Wrapping.
01/26/95 v0.83 ■- Re-did setup to add 8 new BOOMLAB features/settings.
~~~~~~~~~~~~~~ See 'BOOMLAB.DOC' for more details.
∙ Strip ALL Blank Lines <Y/N>? (Mr. Humble)
∙ Enable 'smart' DIZ text word-wrapping <Y/N>?
∙ Strip High-Bit ASC characters <Y/N>?
BOOMLAB v.50 ∙ Replace PCB's "Carrier Lost ... " text.
∙ Archive extensions to reject.
∙ List of filenames to blacklist.
∙ Test archive integrity <Y/N>? - now optional
∙ Strip -AV Protection for ZIPs <Y/N>? - now optional
- If LOG gets over 150k it will start a new LOG file.
Old LOG is renamed OLDLOG.# (# = Node #)
- BBS ADS - Wildcards are now accepted in the 'ZAPFILES'
list. Ex: *.NFO and DEATH*.* - USE CAUTION!!!
- PCB BOOMLAB - If DIZ/SDI had lines longer than 45 spaces
it caused blank lines or lines overlapping in PCBoard
causing an mess. Word-wrapping was added to handle this
but if not enabled, lines will be hacked off. (Jerry S)
- Repacker setup has changed, list all format extensions
to repack (Ex: .ARJ.LZH ) or for all use ALL.
- Age Test '|TA' macro now shows 'OFF' if age check disabled.
- Now will add archive comments to .ARJ files if enabled.
01/21/95 v0.82 ■- Added a couple new keys when in the file directory:
~~~~~~~~~~~~~~ ∙ <C> key = Copy tagged files to a path. Copies ONLY
COPY tagged the file to the desired path, no descriptions. (Rifleman)
∙ <J> key = Change conference. Returns to opening menu.
■- When adding specific files <+> and path is different from
Import files that of current DIR's path, PFED now prompts 'MOVE file(s)
to DIR's path?'. 'Yes' = move file(s) to DIR's path.
∙ Fixed some BOOMLAB bugs when using <+> add files key.
Date Format ■- Date's in the Directory listing and when editing are now
in DIR List shown in your country's correct date format. (Bionic)
■- Fixed major MOVE BUG I've heard about for quite awhile.
PFED sometimes didn't allow files to be moved. Caused by
flag getting set with 'No Files tagged' message - Fixed.
BUGS... ∙ When deleting and all prompts are 'N' it exits. (Bionic)
∙ When sorting and default was not set it would display as
'32' (space) and error if not changed - Fixed.
∙ <U>ncompressing files to path didn't work if extension
wasn't ZIP/ARC/LZH/ARJ (Ex: .VIR) now checks file header.
∙ DOWNLOAD COUNTER - Fixed some display & misc bugs.
. FILES.BBS Importing - Strips comment lines if possible.
Wrong file dates for NON-USA countries. (A. Marcedone)
Always prompted to overwrite file even if empty file.
■- BOOMLAB v.48a - Added a command line mode for PCB BOOMLAB.
LOCAL PCB Can be used from DOS or other programs like file tossers.
Mode Ex: BOOMLAB D:\PFED LOCAL FILE.ZIP D:\PCB\GEN\PUBLIC
See BOOMLAB.DOC for more information. (Mr. Humble)
∙ When virus scanning <E>xe's, program might lock up when
extracting files if command line was too long - Fixed.
Also added .BIN and .SYS files as EXE's to be scanned.
∙ Added new macro: '|VA' = lists all virus scanners used &
ver #'s. '|VP' & '|VV' macros now only shows 1st scanner.
∙ Sometimes a .ZIP would show version # as 78.7 or whatever.
Upper byte was supposed to be for Host System (OS) so now
BOOMLAB reports PKZIP v78.7 as PKZIP v1.9 under UNIX.
∙ Uploader name not added if file wasn't an archive - Fixed.
01/14/95 v0.81 ■- Added BOOMSORT program in package to handle HUGE and
~~~~~~~~~~~~~~ multiple key sorts. Sorting by #4 'Date descending'
Sort HUGE Dirs now sorts date descending and filename ascending.
Hopefully can now sort dirs under OS/2 etc...
■- When trying to View, Get DIZ, or Process a file not online
it will show "*ERROR*" instead of attempting any action
as some people said this would lock up program - Fixed.
■- ARCHIVE VIEWER - .ARC files are now supported for viewing.
∙ Viewing files in recursive subdirs created and left
behind those dirs after viewing was finished - Fixed.
■- DUPE REMOVER FIXES - Global <T> didn't tag ALL but first,
When displaying over 18 dupes it locked up prog - Fixed.
∙ Thanks to BOOMSORT it should now work with larger BBS's.
■- LAST CALLERS - for PCB 15.2 didn't work - Fixed (2n10s)
■- BOOMLAB v.47 - Added a log for BOOMLAB. It will log all
BOOMLAB Log test results, errors, file info and any BBS Ads deleted.
Turn 'LOG file processing <Y/N>' in setup to 'Y'. Logs
will be named BOOMLOG.#, where # is the node # (0=Local)
∙ Some European users said they can't the date check to
Date Style work correctly under OS/2 and other environments. There
»EUROS READ!« is now a manual date format selection in the setup, all
NON-USA users make sure this is set. (DRAGON MASTER)
Added .ARC ∙ PkWare's old PKARC (.ARC) archives are now supported by
support BOOMLAB. Program PKPAK.EXE/PKUNPAK.EXE must be in path.
∙ When deleting random BBS ads by text keywords: files w/o
extensions and files in subdirs weren't being scanned.
Files weren't being deleted after being read - Fixed.
Bug Fixes... ∙ Screwed up scanning files from embedded .ZIPs in v.46
and not all embedded archives were checked - Fixed.
Embedded ARJ's with Ext's like .A01 are now checked.
∙ If Add files to archive list didn't exist it was reported
that it might add any file, now can't - Fixed (Indigo)
01/04/95 v0.80 ■- Fixed some minor bugs.
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ■- BOOMLAB v.46 - there is now a third way to ZAP BBS Ads,
define a text list in setup under 'text to ZAP random
BBS ads. Create a filename such as BBSADTXT, included
in this ZIP, with text to search for. One entry per line.
ZAP files by BOOMLAB extracts all text files and search each for any
text search! matching text! This should be lethal to those random
BBS adders, but does take a little longer to process.
Currently only ZIP's are supported. (Rifleman)
∙ Added support for AVSCAN v1.91 (c)H+BEDV Datentechnik GmbH
A nice scanner from Germany available on CompuServe.
∙ If ZIP or embedded ZIP was part of a backup set it would
fail (NO FILES), it now won't try to process the file but
adds warning to desc 'WARNING! - BACKUP ZIP NOT TESTED!'.
∙ PKZIP version would sometimes show 1.0 when it was created
using 2.0, the local header didnt have enough info, so
now it reads the end central dir record-technical crap ;)
∙ If virus scan detects only a possible virus, BLAB now
indicates it 'Might be' whatever named virus.
12/29/94 v0.79 ■- Added more CD-ROM support: From the DIR selection screen
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ <G> will import a FILES.BBS for only the highlighted
area. Helps if re-doing or there's no master FILES.BBS.
More CD-ROM ∙ When importing a FILES.BBS and the output DIR file
support already exists it will now prompt before overwriting.
∙ Added support for another FILES.BBS description format:
FILENAME.ZIP [0] DESCRIPTION GOES HERE
■- BUG: Dates such as 99-99-99 caused fatal error 'Illegal
Function' when writing out a new PCB Index file. DIR
from that point on would be lost! - Fixed.
Bugs fixed ■- BUG: Clone full file desc (CTRL+K) didn't work - Fixed.
∙ When cloning (K,CTRL+K) cursor now advances to next file.
■- ARC VIEWER - Couldn't delete some volume labels - Fixed.
■- BOOMLAB v.45 - Added macros |tc = results of archive test,
|ta = results of age test, |tv = results of virus scan.
|dw = DIZ text without any PCB color codes.
∙ MACROS: Added the ability to format ouput of all macros.
Format output Add the number in brackets [n] after the macro code.
of macros ex: |fn[13] Additionally with the |DZ (DIZ) macro you
can specify how many lines to display ex: |DZ[45,10] =
Display 10 lines of the DIZ desc formatted to 45 spaces.
∙ Designed a new PCBPASS.MSG taking advantage of new stuff.
∙ Some internal archives over 1 meg werent being processed.
Boomlab bugs ∙ If no files to virus scan it won't scan, saving time.
∙ Fixed some 'bugs' dealing with getting virus name.
∙ Now detects a scheme people use to hide BBS Ads - Fixed.
∙ If ZIP or internal ZIP was part of a backup set PKUNZIP
prompts 'Insert last disk' causing BLAB to stall - Fixed.
12/21/94 v0.78 ■- Added <F> 'Import CD-ROM areas using FILES.BBS to the
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ Dir selection screen. This reads the master FILES.BBS
in the CD-ROM's root directory, automatically adds the
Import FILES.BBS file area and imports the file descs. Can Handle 5
(CD-ROM) different types of FILES.BBS. (See PFED.DOC for more)
■- CONF EDIT: Inserting a File Area didn't work - fixed.
■- DOS/ARC VIEWER - Total Kb of tagged files is shown at top.
■- When selecting a dir with 0 files it fatal errored - fixed.
■- BOOMLAB v.44 - Archive Integrity Testing (CRC) is now
done internally by BOOMLAB. If using standalone for
CRC Testing PCBOARD, modify and use the updated PCBTEST.BAT included.
Changed ∙ When internal archives are extracted for virus scanning
they are also now CRC test. (Third Son/Wildchild)
∙ Added Setup setting 'Add Blank line between descs' this
will add a blank line to end of all text for each file.
∙ If BBS Ad file was a volume label and over 8 bytes it
wasn't deleted. (Ex: MISSING_VOL) Also after first CRC
match found, BOOMLAB didn't look for any other matches.
∙ When using multiple virus scanners and last scanner passed
file but others failed it didn't fail file. (Phreak Creep)
∙ If a file failed a local test and had no .DIZ it wouldn't
display the skull desc, just 1st line - fixed. (Copyright)
∙ Added 2 macros |AT (Archive type), |AI (Archiver Info)
∙ Fixed a LOT of little bugs in BOOMLAB
12/16/94 v0.77 ■- MEMORY: Can now have an unlimited # of files. (BayBeVet)
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ∙ Freed up 18k more memory, may help with external progs.
∙ Some users got 'OUT OF STRING MEMORY ERROR', and other
problems when entering a conf with many dirs, re-did
routines and should now handle those huge conf's dirs.
■- DIR MENU now displays dir #'s > than 99. (Craig Salmond)
■- CONF EDIT: If subdir doesn't exist, now asks create? (Y/N).
■- EXPERT MOVES: After moving files, PFED didn't properly
clear all dir/conf move to flags from the Dir - fixed.
∙ PSETUP: Pressing <F10> on the BBS Config Path caused error.
∙ PFEDNUKE.PPE Mail showed 'DELETED' for date - Fixed.
■- BOOMLAB v.43 - Added FILESYS.PPE (Standalone PCB only),
a PPE that will automate the handling of failed files.
New FILESYS.PPE It can write E-Mail to the sysop, user, delete file,
and nuke any failed file. (See enclosed FILESYS.ZIP)
∙ Added new macro |NL = add new line. Helps if your trying
to fit a lot in 'Upload by' string. (Diabolical Joker)
∙ BUG: Sometimes NON-USA date formats didn't work with PCB
Standalone ver. - it couldn't find BOOMSYS.DAT. (ToSH10)
12/09/94 v0.76 ■- Added a key for virus collectors <ALT + V> uses BOOMLAB's
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ defined scanners to get the virus name as description
for all tagged files. Ex: CASCADE.1701.S virus or variant
Get Virus Name If multiple scanners are defined it will use 1st virus
as Description found. If none found then description won't be changed.
∙ To define your own desc output create a text file named
'VIRUSADD.TXT' using macro codes. A new macro '|VN' for
virus name was added for this purpose. (See BOOMLAB.DOC)
■- Added BOOMLAB Setup option to virus scan using Heuristic
Analysis if available (ThunderByte, F-Prot). Use with
Heuristic caution as Heuristic scans can find unknown virii but
Virus Scans will give more false readings. It requires more memory
so it may not be available in local mode. (Phreak Creep)
∙ NOTE! - Make sure to unzip PFEDTEST.BAT and BOOMSCAN.BAT
---READ!---> from this version or BOOMLAB will not work properly.
∙ BOOMLAB & Archive Viewer previously used file extensions
to determine type of archive it was. They now check file
headers to see if it might be a ZIP, ARJ or LZH. (RAGE)
Both also now support self-extracting ZIP's.
BOOMLAB v.42 ∙ NON-ARCHIVES (COM's/EXE's) previously were virus scanned
in the PFEDTEST.BAT file using only SCAN. They now are
full scanned using BOOMLAB's defined virus scanners.
∙ If 'PATH TO MOVE BAD FILES' is defined it should now work.
∙ If using more than 1 virus scanner '|VV' won't display.
& Fixed bug with macros that sometimes chopped last char.
■- When in e<X>pert file moving mode and tagging a file,
Expert Moves default conf#, area# is now whatever last entered (2n10s)
∙ When a file has been tagged in expert mode, it now shows
where it is to be moved in the date field. Ex: MV:1,4
12/05/94 v0.75 ■- New way to attack BBS Ads...In Archive Viewer, <C> adds
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ CRC Value to ZAP List. Then if any CRC matches are found
by BOOMLAB they will be zapped. This only gets those who
ZAP files by rename Ad files all the time, but it won't get those ads
CRC Value that use macros to add filename, size, upload date etc.
In the archive viewer CRC Test is now CTRL + C was <C>.
■- Added CTRL+C, does CRC test on highlighted file in a DIR.
CRC Testing ∙ Changed Compact Desc to ALT + C (Running out of keys)
■- DOWNLOAD COUNTER now uses PCB index, says 'Skipped' if no
DL's from a DIR. Overall should now be a little faster.
■- BOOMLAB v.41 - ZAP files by CRC-32 value. Use Archive
Viewer (above) or manually add CRC:######## to ZAP list.
∙ Macros show 'NONE' for NFO & DIZ if they were included
BOOMLAB v.41 in the date EXCLUDE file - fixed. (Phreak Creep)
∙ When extracting FILE_ID.DIZ's, usually in LHA's, desc is
extracted all as 1 line. Files have NON-IBM linefeeds
so it will now detect and correct. (BAZZA/Time Walker)
11/27/94 v0.74 ■- BOOMLAB v.40 - Added 5 different ways to age test archive:
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ NEW - Use Newest file date. [default]
OLD - Use Oldest file date. (Shouldn't use this)
Age Checking DIZ - Use date of FILE_ID.DIZ. If none use Newest.
AVG - Use Average of file dates.
MOST - Passes only if MOST of the files pass age test.
■- There's now a UPDATE.BAT file to correctly update new
PFED versions. Unzip the PFED_### zip to a disk or temp
UPDATE.BAT dir and type UPDATE followed by location of PFED. Ex:
UPDATE D:\PFED This updates all necessary files without
overwritting any data files you've modified (Rifleman)
More Areas ■- Can now have unlimited # of areas in a conference. Only
limited by how much memory you have. (Jose Romero)
Create 0-Byte ■- When nuking files it prompts "Create a 0-Byte file", Yes
keeps file from being UL again, now optional. (Mr. Bill)
■- Added a new key for a highlighted file: CTRL+F will
PKZIPFIX key PKZIPFIX & replace the highlighted file. (This will fix
files screwed by NETWARE NLM prob that doubles filesize)
■- PFED now informs you when adding duplicate line to the DIZ
Misc... Strip file <CTRL+B>, also doesnt advance line. (Rifleman)
- Filesize now correctly displayed if >3 megs (Time Walker)
- Sort by Desc fixed for 4000+ files (Falcon)
- In PCB if # of confs was set higher than actually used
it could cause PFED not to run - Fixed (Ernie Stefan)
11/17/94 v0.73 ■- Added a new way to move files, <X> will toggle a eXpert
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ file moving mode. In this mode, after tagging a file,
PFED will prompt for conf # and area # to move files to.
Expert File And then when <M>ove is initiated the files will be
Moving Mode moved to all the various areas. Saves a lot of time but
you'll have to know all the area #'s. (The Master)
∙ DOS Shell has been changed from <X> to CTRL-X.
■- For Command Line options (LIST, SORT, TIMESDL) you can
now specify the areas in a conference to perform the
Can Specify command on. Add the area #'s in parenthesis after conf
Areas on the #. Ex: PFED TIMESDL 0,1(1-20,22),5-15 In this example
Command Line PFED will only process areas 1 to 20 and 22 in conf #1.
As shown in the example commas and hyphens can now be
used between conf & area #'s ##,##-## (previously had
to use a space & list ALL confs) NOTE: For TriBBS use
just the area #'s Ex: (1,3-5) (Mr.Bill & BaybeVet)
■- When the full desc toggle is on all @X codes are stripped.
11/05/94 v0.72 ■- TRiBBS - When adding file descs using PFED, many descs
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ wouldn't list correctly in the BBS - Fixed. To fix
a dir make at least one change and save. (Kurt Samuel)
■- BOOMLAB: Added a repacker to convert ARJ or LHZ or BOTH
to ZIP format. NOTE: Internal Paths are NOT supported.
■- Added <L> key in dir, it changes the status of all
offline files in the dir to 'OFF-LINE'.
■- When using command line option TIMESDL, PFED didn't
update PCB index files as it should, slowing down scans.
■- When toggling screen info (Tab), filesize is shown at top.
■- BUGS: When adopting all files, PFED prompted Process
All? <Y,n,z>, the Z shoulda been a G - Get DIZ ONLY.
∙ After adding files PFED cleared tags but not totals.
∙ In 43 & 50 line screen modes full desc editor had bugs.
∙ Dupe Checker sometimes didn't work, error #19 - fixed
∙ Early v.71's command line options didnt work - fixed
10/31/94 v0.71 ≈ Trick or Treat version ;)
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ■- RE-DID DUPE CHECKER: Now scans using .IDX files, (PCB)
and then subdir files. Doing both muck quicker.
Improved And only reads dir once (CD-ROMS wont be worn out)
Dupe Checker It was also leaving out Upload & Private dirs.
■- NEW DUPE REMOVER: after scanning for dupes PFED will
prompt <V>iew, <P>rint or Dupe <R>emover. The dupe
remover displays each dupe and the DIR's or subdir's it
was found in. Select dupe to delete by selecting the
DUPE REMOVER corresponding #. <A>=Selects all listed dupes.
GLOBAL KEYS include: <D>=Tag all dupes in a specified
dir/subdir. <T>=Tag all dupes but the first file listed.
Press <Esc> when done. It will then remove all tagged
dupes: NOTE: This should be done with users offline.
■- You can now define the default # screen line mode: 25,
43 (EGA) or 50 (VGA) line modes in PSETUP. The opening
43 & 50 line screen will be in 25 line mode everything else will be
Screen Modes in the screen mode selected. Additionally while in a
area DIR you can use keys 2, 4 & 5 to toggle between
25, 43, and 50 line screen modes.
■- Under Pg # it now shows file #'s ex: 1 oƒ 300 (CanopeneR)
■- Added BOOMLAB macro '|vv' shows version of virus scanner
used EX: |vp |vv scan results: |vr
ThunderByte 6.24 scan results: PASSED
∙ Date Checks for .ARJ's & .LZH's didnt work! - fixed
BOOMLAB fixes ∙ Didn't extract .ARJ files or internal .ARJ files
for Virus Scanning, extracted to defualt path - fixed
∙ Wouldn't add files to an .ARJ - fixed (Falcon)
∙ Wouldn't extract internal archives during virus
scans if different kind of archive - fixed
■- BUGS: Delete key sometimes stopped working - fixed.
∙ <F5> key in quick edit mode didn't clone desc - fixed.
∙ When using <V>iew & file is not in dir it could lock up
some systems, now checks FAT before trying. (Falcon)
10/25/94 v0.70 ■- Added support for TriBBS by TriSoft. (v5.02 - 01/18/94)
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ Hopefully it will work with any newer versions.
■- Added DUPE CHECKER, <D> from the conference or dir menu.
It will scan all BBS subdirectories for dupe files.
Will add other kinds of checks in later versions.
■- When exiting an area, PFED now asks 'EXIT AREA - Are you
sure?', got tired of exiting accidentally. This & most
other Y/N questions now have a YES/NO toggle prompt.
■- Check out the screen info toggle key <Tab> or <T>.
'Online' tells if file is in dir, (Much faster now) &
displays the FULL description of the HIGHLIGHTED file
in the right portion of the screen. Cool!... Example:
Filename Date Online Description oƒ PFED_066.ZIP
PFED_065.ZIP │ 10-25-94 │ No │ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
>PFED_066.ZIP │ 10-26-94 │ Yes │ ■ ▀▄▀▄█▄█▌▌ -:- PFED v0.66 -:- ▐▐█▄█▄▀▄ ▀ ■
PFED_067.ZIP │ 10-27-94 │ Yes │ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
PFED_068.ZIP │ 10-28-94 │ Yes │ Deluxe PCBoard/Express BBS File Area Mgr.
PFED_069.ZIP │ 10-29-94 │ Yes │ Move, delete, edit, & sort files quickly.
Archive viewer, desc & DIZ editing, file
NUKER, Local and PCB Standalone local ul
processor (BOOMLAB), log viewers, command
line MASTER LIST & DOWNLOAD COUNTER too!
* 43/50 lines now supported *
■ ▀▄█▄▀█▄██▀███████████████████▄█▀▄█▄▀▄ ▀ ■∙
■- Couldn't adopt files with Novell DOS, this caused me to
redo how PFED reads the dir's FAT table, should now work
w/Novell DOS & adopts files faster too. (Techno Rave)
■- When putting descs into archive as FILE_ID.DIZ (CTRL+P)
it now supports .LHA's and .ARJ's, not just .ZIP's.
■- Converted opening screens to faster format, make sure
unzip all .SCR files from the PFED_###.ZIP file.
■- Setup now asks for the BBS main path, instead of copying
a new config file each time to the PFED dir.
10/21/94 v0.65 ■- Can now have conferences #0-200. (Apocalypse)
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ■- When deleting file but leaving desc, PFED now displays
"DELETED" in date field. (PRIME EVEAL/Time Walker)
∙ Also added a new tagging key: CTRL+O = tag all files
marked as 'DELETED' or 'OFF-LINE' so the dir desc's
can be batch deleted or moved.
■- Added new macro code |nu = name of uploader without
any color codes for use in misc. text files. (ToSH10)
■- TIMESDL (Download Counter) fixes, additions:
∙ Can add PCB color code (@X) to 'Times downloaded' text
line. Define on line #11 on pg#1 in PSETUP. (BayBeVet)
∙ BUG: If DOWNLOAD.TXT file had not changed, PFED would
error. Now reports "NO DOWNLOADS TO LOG!" (Apocalypse)
∙ BUG: Was adding a blank line to some files every time
TIMESDL was used - fixed. Extra Blank lines removed.
■- Fixed a bug with the new .IDX support - it didn't always
put newest file date in header. Also when moving files
to another dir, it didn't update that dir's index.
■- BUGS: If ULBY.DAT had an extra line, it would cause
BOOMLAB to error out with 'Input past end'- fixed
- Fixed some display bugs when using 'Z', 'U' scans.
10/18/94 v0.64 ■- PFED now writes PCB's index file (.IDX) when writing
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ out a file dir. This was to enable adding a full dupe
checker (next version) and little did i know initially,
PCB needs it to make new upload and zippy scans faster.
■- New command line feature: PFED SORT, sorts file dirs.
PFED can sort all confs, or specified confs. There is
also a 'UPLOAD' switch will sort only UPLOAD dirs.
PFED SORT (sort all dirs of all confs)
PFED SORT 0 2 (sort all dirs in confs 0 & 2)
PFED SORT UPLOADS (sort all upload dirs in all confs)
PFED SORT 1 UPLOADS (sort upload dir only in conf #1)
■─ When editing BOOMLAB options in PSETUP, F2 edits high-
lighted file. If a text editor is defined in External
Utils it will run that else tries PCBEDIT or EDIT.
» ASC Char 11 is now stripped from any incoming .DIZ text.
■- BUGS: When using 'W' or '+' (adopt files), PFED
wasn't adding local uploader name. - Fixed.
10/15/94 v0.63 ■- BOOMLAB v0.35 IMPROVEMENTS
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ──────────────────────────
∙ Got tired of no color so added some pretty colors. ;)
∙ Added BOOMLAB support for country codes, it now shows
Now Supports & calculates correctly for European (DD-MM-YYYY) and
Country codes Japanese (YYYY-MM-DD) date formats. (E-Buzz/ToSH10)
∙ You can pass the files through more than just one of the
listed scanners if you enter '+' for scanner #. Create
a file named SCANNERS.CFG and list the scanners you want
Use Multiple to use in the format: Scanner #, Full Path & scanner
Virus Scanners Ex: 5,C:\FPROT\F-PROT
3,C:\TB\TBSCAN
2,C:\MCAFEE\SCAN
BOOMLAB displays only the 1st virus found. (ToSH10)
∙ Standalone PCB version now reads PCBOARD.SYS file and
Can now add adds uploader name if set to 'Y' in BOOMLAB setup
Uploader in (Add 'Uploaded by' to PCB UL's). In PCBSETUP under
BOOMLAB for PCB G)Config Options, B)File Transfers the "Include
'Uploaded by' in Desc" must then be set to 'N'.
∙ Added ULBY.DAT support, a file generated by the PPE's
Now Supports ULBY.PPE or UNAME.PPE. In the BOOMLAB setup enter ONLY
ULBY.DAT the path where it is located and it will convert the
uploader name to a specialized signature. (ToSH10)
Macros in ∙ The 'Uploaded by' text string can now support macros:
'Uploaded by' Ex: Uploaded [|ut] by: |nm
text Uploaded [12:10] by: BOOMER
∙ Added new macro code |nm = Name of uploader.
∙ Uploader name is now converted to upper/lower case.
Ex: THE BOOMER is now converted to The Boomer.
■- Added JPG (Compressed GIF) external viewer in setup.
JPG Viewer It automatically runs when doing <V>iew in DOS &
Archive viewers and the extension is .JPG (Royce)
∙ DOS Viewer: Pressing enter on "." didn't exit to root.
■- Sort by Desc didn't work right...Hopefully fixed (Falcon)
10/09/94 v0.62 ■- MAJOR BUG: When trying to adopt files in an empty dir
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ it would lock up system - fixed.
■- Added F-PROT as a supported virus scanner.
■- When adopting files for PCB, & using 'A' for ALL files,
and using '?' for uploader name it will scan the xfers
log for each uploader not just the 1st. (Wildchild)
■- Free Space Screen <H> now shows expanded memory
[Mem:380k/8232k] 1st #=conventional, 2nd #=expanded.
Added Cursor keys: Home,End,Page Up & Page Down.
10/02/94 v0.61 ■- Worked on the Function keys in full EDIT <E> mode:
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ∙ Added 'F4' = Loads text file. This will append
whatever file entered to the end of a description.
Can be used for such things as logo's/groups etc...
∙ Improved 'F5' Clone file desc. Now clones entire
description of preceding file. (For big sets)
∙ Fixed 'F6' = adds GIFSpec to file description bugs.
■- When adopting files (W or +) for PCB, you can enter
a '?' for the uploader's name and PFED will scan
the transfer log for who uploaded it. (Wildchild)
■- Had added a command line Download Counter in v.57,
you can now specify which conferences to use it
with by adding the conf # to the command line Ex:
>PFED TIMESDL 1 3 61 =Process confs #1,3 & 61 ONLY
>PFED TIMESDL =Process All Confs (Mr.Bill)
∙ You can also do this with Master List >PFED LIST 1 3 61
and it will produce master list for only those listed.
■- When file is nuked, desc now shows *NUKED* for filesize.
■- BUGS: Increased Stack Memory alloted to try and fix
any crashes while adopting lot's of files. (Sente)
∙ If DIZ Text remover had a blank line then all lines would
be stripped, also CTRL+B can now not add blank lines.
09/27/94 v0.60 ■- Added 43 & 50 line mode support to PFED!. You can run
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ PFEDVGA.BAT, if you have a VGA card it will give you
a 50 line mode, if EGA then 43 line mode. Made the
Graphics program (BMODE) external to save about 20k.
PFEDVGA.BAT > BMODE 50
PFED
43 & 50 line BMODE 25
modes for PFED ∙ Another way of achieving 43/50 line mode is to load
ANSI.SYS in the CONFIG.SYS file, this allows use of
the lines command. (DEVICE=C:\DOS\ANSI.SYS)
SAMPLE BATCH > MODE CON LINES=43
PFED
MODE CON LINES=25
Don't use BMODE if ANSI.SYS is installed and if you
have memory problems then you can't use these modes.
■- BUGS: Fixed Fatal Error #19 when trying to view some logs.
∙ PFED didn't ask 'Create Master List?' when using 'M' key.
09/25/94 v0.58 ■- In EDIT mode added CTRL+B, this adds line to the DIZ
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ text remover file. (Question #2 in BOOMLAB setup) This
This allows for quick adding of those hard to copy BBS
ads in the .DIZ files. (Rifleman, Wildchild)
■- Added new batch key, CTRL+A will add the tagged file's
description as a FILE_ID.DIZ into the archive. (Rifleman)
■- When giving a bonus (CTRL+B) or give warning (CTRL+W) if
uploader not found, PFED can scan transfer log (Wildchild)
■- Anytime local BOOMLAB is run the filesize is now updated.
■- BUGS: DIZ text remover only worked if uppercase - fixed
∙ Some very big drives would cause PFED to error out
or at the least show incorrect HD space info - fixed.
Also added 'CD' to free space screen if a CDROM.
∙ Exploding windows on/off flag didn't save (Wildchild)
∙ Sort by description didn't work with large dirs (Falcon)
09/16/94 v0.57 ■- Added sort dir by description. (FALCON)
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ ■- PCB BUG: If node numbers weren't used in PCBSETUP
then logs A,B,C & L didn't work and BOOMLAB PCB
Standalone didn't work - Fixed (FALCON/Charlie Echo)
■- New Download Counter, a command line feature for batch
events >PFED TIMESDL This will add "Times Downloaded:"
Download to the file desc's. This should be run during a
Counter nightly batch event as no callers should be online.
If run from batch event it must be run from PFED dir.
Ex: CD\PFED
PFED TIMESDL
09/11/94 v0.56 ■- Improved the File Nuker for PCB: 1)If uploader name
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ not found in the description the nuker will prompt
"Scan transfer log (Y/n)" - It will attempt to find
Nuker: Scans who uploaded the file and may take a few seconds
transfer log depending on the log size. 2)The nuker will also
for UL'er & prompt "Restore Downloader's Credit (Y/n)", it will
can restore find all those who downloaded the file and restore
DL'er credit. credit for the download! (Homie D. Clown)
■- Added Option in BOOMLAB setup to select 1 of 4 virus
scanners. 1-SCAN, 2-New SCAN (2.1.0), 3-ThunderByte,
BOOMLAB v0.26 4-Dr.Solomon's. Next enter the full path & program
Virus Scanner name. This virus scanner is for BOOMLAB only.
Improvements ∙ If a virus is found, BOOMLAB will read the scanner's
& text file log and show the virus name found in the description.
translation ∙ Added in the BOOMLAB setup the option to 'translate'
a text file. Macro codes in the file are translated
and the file is renamed with a .CMT extension. File
can be added to the add files list (Homie D. Clown)
■- When adopting files in a directory that the dir
text file is also kept then it will be skipped.
Improved LHA ■- Archive Viewer - BUG: If viewing a file then
functions. adding a file it wouldn't re-display dir - fixed.
∙ Added /m (answer yes) switch to any LHA function.
∙ Added /n1 (supress output) to add/delete LHA functions.
■- Fixed a bug with adding GIF Resolution to end of desc.
09/05/94 v0.55 ■- PROBLEM: If there were PCB color codes in the
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ description, PFED would only allows 45 spaces and
some text may be lost. PFED now allows longer lines
IF color codes detected, maximum to 57 spaces.
■- When NUKING a file and deleting/nuking the actual
file the file size is now displayed as '0'.
∙ When searching for uploader now looks for "BY: "
■- Added |df macro to BOOMLAB, prints φ DIZ if .DIZ found.
■- Fixed a bug with line #'s in DIZ's, using <G> key.
∙ Fixed a bug with deleting files <V>iewed that already
existed in \PFED dir. (MV.COM doesn't permit paths)
∙ Fixed a bug with @X Codes in the <T>ype command.
09/02/94 v0.54 ■- Added a <L>ist function to use an external LIST
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ program, such as D. Buerg's LIST, to view text
files. Works in DOS & Archive viewers. Define
external lister in PSETUP under 'LIST UTIL'
∙ Added <C>RC test archive to archive viewer.
■- BOOMLAB BUGS - Now Handles Amiga files correctly.
∙ Removed add blank line from .53 as it was incorrectly
inserted between description and uploaded by.
∙ Added some error detection for creating output text.
08/29/94 v0.53 ■- Added CTRL+K Klone FULL file description of
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ previous description. <K> still gets only 1st line.
∙ When using <K>lone & CTRL+K, the klone feature now
increment sets if structured as any of the following:
1/3 1\3 1 / 3 1 \ 3 1 OF 3
■- BUG: Couldn't view .ARJ's inside archives - fixed.
∙ BUG: Fixed some bugs dealing with <T>ype command.
∙ BUG: Would sometimes get Error #3's exiting from
conference menu - fixed
∙ BUG: Boomlab for PCB didn't add a blank line if 'Y'.
08/25/94 v0.52 ■- Added a new safety feature so that a dir can be
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ recovered if for some reason (out of HD space
etc) the dir you were working on was lost. Before
Auto-backup of PFED writes out the new dir it copies the old dir to a
working dir to backup file. Ex: GAMES ==> GAMES.BAK If GAMES is
prevent loss lost you can then copy GAMES.BAK over. This does
slow down the writing process but you can turn it
off in the PSETUP (Question #10) if desired.
■- When viewing .PCB graphic files using <V>iew or
PCB Codes <T>ype the @X codes are now translated into colors.
Re-did how the <T>ype function works.
08/23/94 v0.51 ■- Added new command 'U' uncompresses all tagged files
≈≈≈≈≈≈≈≈≈≈≈≈≈≈ to a specified dir. For unzipping big disk sets.
■- BOOMLAB v.22: For PCB Standalone BOOMLAB, now
supports 'TEST' as a mode. Its displays the
archive CRC test results for .ZIP/.ARJ/.LZH's (Mr.Bill)
PCBTEST.BAT Example Setup:
IF "%2" == "TEST" goto TEST_FILE
:TEST_FILE
D:\PFED\BOOMLAB D:\PFED\ TEST %1 %3 %PCBDIR%
^^^^
∙ If archive was a .LZH or internal archive was .LZH,
then internal archive wasn't checked properly - fixed.
∙ On .LZH's the # of files was off by one and now
it skips date compressed in old/newest date check.
∙ Some Zip comments caused BOOMLAB to halt, it now
reports and then continues. (CHR 26)
∙ Skips filesize = 0 files when determining newest date.
∙ Shows Virus Scanner as McAfee's even if not scanned.